Search Results: 'Barhale'

You searched for Barhale

Current Refinements
Barhale
  Content Type Features
Remove all refinements
Refine Search Date 2000 (1) 2002 (1) 2007 (1) 2008 (1) 2011 (1) 2014 (1) 2015 (1) 2019 (2) 2020 (1) 2021 (2) 2023 (2)

Small bores, big impacts
28 June, 2023
Views shared with TTNA on the trends and advances in the trenchless and microtunneling markets

Rod Young – Interview
13 June, 2023
Rod Young is the Chair of the British Tunnelling Society (BTS). Unlike many of his predecessors, his speciality is in microtunnelling. He talks to Julian Champkin about the importance of small-bore, and his hopes for the post-Covid BTS

National grids
25 March, 2021
Utility grid projects bring a variety of tunnelling challenges. Report by Patrick Reynolds

Laser scanning covers the points
25 February, 2021
Laser scanning and 3D virtual modelling were critical tools in the refurbishment of a deep shaft on London’s Thames Water Ring Main, resulting in a better foundation for future repair and maintenance. Julian Champkin reports

Beneath Oslo and the deep fjords
17 July, 2020
Dr Benoît Jones reports on the British Tunnelling Society’s evening meeting which discussed the technical challenges posed by future tunnels in Norway

Chelsea to Battersea tunnel surface settlements
16 August, 2019
Monitoring of ground surface movements induced by the construction of the Chelsea to Battersea Pipeline Tunnel project is presented as part of this case study. The surface settlements induced by the shaft construction have been analysed and compared with current methodologies and information from recent projects. Movements from excavation and construction of the tunnel are also analysed, and back-analysis of volume losses is presented. The authors are Veriuska Ortiz Lovera, geotechnical engineer, Mott MacDonald; Andrew Hejdner, project manager, Cadent Gas; James McCaffrey, construction manager, Skanska UK Construction; and Mohammad Arasteh, senior tunnel engineer, Mott MacDonald

To the next century
08 March, 2019
Alex Conacher visits the Elan Valley Aqueduct project in Wales, where tunnellers are constructing three bypass sections adjacent to the existing Victorian asset

A perfect storm
30 October, 2015
The UK pipe jacking industry is in a sharp, albeit brief slump. Several factors have come together to make what was supposed to be an end to the rollercoaster of water work, into a complete halt in activity. Alex Conacher reports.

Maida vale
29 July, 2014
Pipejacking is a key part of a flood alleviation project which is set to protect hundreds of properties in northwest London

Hard treatment for unforgiving chalk drive
13 April, 2011
Climbing down the steep cliff-side steps, past the flint layers, of which there are many, each indicating some great, apocalyptic extinction event, it becomes clear just how deeply and how steeply the pipe must descend. Alex Conacher explores the Joseph Gallagher worksite near Brighton, one of the most ambitious jacking projects ever undertaken in Britain

Drill and blast in confined spaces
29 April, 2008
At the joint meeting of the BTS and MinSouth on 21 February 2008, Richard Soloman, project manager for WECS, Damian McGirr, of Donaldson Associates, and Mark Thomas, site manager for WECS, described the drill and blast works on an urban flood alleviation tunnel in Bristol, UK

Harding Prize 2007 winner Datchet repair
26 June, 2007
In his winning Harding Prize 2007 paper, Ian Whitehead of Mott MacDonald, describes the repair of the Thames Water raw water pipeline near Datchet, in the UK, on which he was a design engineer based on site for the duration of the works

2002 Tunnelling Industry Awards
13 June, 2002
On 10 May the first Tunnelling Industry Awards ceremony took place, an event jointly organised by the BTS and T&T International, to recognise and reward achievement within the underground construction industry in the UK

Micro modifications give macro improvements
12 December, 2000
After over 15 years of development, microtunnelling is now practically a mature technology but some improvements are still being made.